Champion Power Equipment PP-3 Manual de usuario descargar pdf (Pagina 54)

MAINTENANCE

¾ Carefully pull the heater and wires out, exposing the electrical connections.

¾ Disconnect the electrical Connections.

¾ Remove the gasket.

Gasket

¾ Get the new heater and slide the gasket over the wires.

¾ Connect the electrical connection and slide the wires and heater into position.

¾ Install and tighten the clamp.

¾ Install the perforated cover.

¾ Turn on the main power.

Replacing Thermocouple

¾ Turn off and lockout the incoming power to the

control panel.

¾ Remove the perforated cover located at the back

of the tank by loosening the two fasteners (see

illustration in Replacing Heater).

¾ Remove the clamp by loosening the wing nut.

¾ Carefully pull the thermocouple and wires out, exposing the electrical connections.

¾ Disconnect the electrical Connections.

¾ Remove the gasket.

¾ Get the new thermocouple

and slide the gasket over the

wires.

hermocouple

Clamp

Wing nut

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 66 67

Sin comentarios

Champion Power Equipment PP-3 Manual de usuario Pagina 54